> Ring Lights

< Ring Light >

Ring Light for common illumination of a vision system.

R80 & R130 Ring Light mounts directly to Lens

The new R80 & R130 LED Ring Light can be quickly and easily adapted to any vision system with either of four standard mounting options that are provided with each unit. First, there is a standard M46 thread protruding from the back of the R80 & R130. Using readily available step-up or step-down rings it can be mounted directly to the threads found on the front end of most lenses. Second is the ability to mount the lens at the front end of the R80 & R130 Ring Light. Once again, an off-the-shelf M46 step ring can be used to adapt lenses with M43 or smaller filter mounting threads. A flange at the front end of the R80 holds the step ring with three set screws, and the camera lens is inserted through the center of the R80 & R130 and threaded onto the step ring. In those few cases where the lens's locking thumbscrews may prevent the lens from fitting through the center of the R80, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed. Third is a T-slot on all sides. Standard industrial T-nuts can be dropped into the slot for mounting. Fourth way to mount the light is using the threaded M4 holes on the back plate of light.

R80 Ring Light

R130 Ring Light

The R80 & R130 Lights are a high output LED light in an aluminum housing. Housing uses industry standard T-Slots for ease of mounting. Ring Lights are available in light output of White, Red, Amber, Blue, Green, Cyan, IR and UV. Ring Light includes an integrated constant current driver with a built in strobe input with option for PNP or NPN trigger control. No need for an external driver to control the light. The integrated driver also includes variable light intensity control. Light can be controlled by a manual potentiometer or a 0-10VDC analog signal.

R80 & R130 Ring Light Drawings and Data Sheets:

Large Lenses can be mounted on back Ring Light

Small Lenses can be mounted inside Ring Light

Easy Mount System

Adapter_Kit_150

Standard Adapter Kit>
Adapter Kit includes 2 step up rings (25.5 and 27), 6 set screws and hex tool. 6 set screws - 3 for mounting step up ring to light and 3 additional for lens. Some locking thumbscrews may prevent the lens from fitting through the center of the R80, extra low-profile replacement set screws are included, allowing the protruding thumbscrews to be removed.

Step UP Kits>
Step Up Adapter Kits includes step up rings, 6 set screws and hex tool. Lenses can be mounted to front or back of ring light.

M46 step-up

Lens thread size

Part #

46-

25.5

SU46-25.5

46-

27

SU46-27

46-

30.5

SU46-30.5

46-

34

SU46-34

46-

37

SU46-37

46-

37.5

SU46-37.5

46-

39

SU46-39

46-

40.5

SU46-40.5

46-

43

SU46-43

Step_Up_90

Step Down Kits>
Step Down Adapter rings for mounting large Lenses to back of ring light.

M46 step-down

Lens thread size

Part #

46-

49

SD46-49

46-

52

SD46-52

46-

55

SD46-55

46-

58

SD46-58

46-

62

SD46-62

46-

67

SD46-67

46-

72

SD46-72

Step_Down_100

Light Distribution Data Sheets
R80 Output Distribution Data Sheet - Standard Lens	PDF File
R80 Output Distribution Data Sheet - Narrow Lens	PDF File
R130 Output Distribution Data Sheet - Standard Lens	PDF File
R130 Output Distribution Data Sheet - Standard Lens	PDF File

Filters can be used with either Front or Reverse mounting